Current Sensor
CRNS-10
The CRNS-10 monitors electrical current and transmits readings over wanwave LPWAN, supporting remote visibility into equipment consumption. Current-level reporting is provided as a percentage across a 0–63 A range, consumption-change detection within two seconds, and average consumption reporting for the preceding four to six hours. BLE is available for local configuration.
Powered by a 3.6 V lithium thionyl chloride battery, the sensor has a battery life of five years and transmission power below 25 mW. Its compact, IP66-rated enclosure measures 89 × 80 × 48 mm and weighs 255 g.
MEASUREMENTS
Electrical current level and changes
COMMUNICATION
wanwave LPWAN
POWER SUPPLY
3.6V LiSOCl₂ battery
ENCLOSURE RATING
IP66
Applications
Technical specifications
| Model number | CRNS-10 |
|---|---|
| Measurements | Electrical current level and changes |
| Measurement accuracy | Current Level: % from 0 to 63A Consumption Change: Within 2 seconds Average Consumption: For the last 4-6 hours |
| Communication interface | wanwave LPWAN |
| Configuration interface | Bluetooth |
| Power supply | 3.6V LiSOCl₂ battery |
| Enclosure rating | IP66 |
| Operating conditions | -40°C to +80°C |
| Dimensions | 89 × 80 × 48 mm |
| Weight | 255 g |
| Battery life & conditions | 5 years |
Connectivity & integration
CRNS-10 measures electrical current using a compatible current clamp and transmits readings over wanwave’s proprietary network. A compatible wanwave gateway forwards the data to wanwave monitoring platforms or your existing IT systems. Bluetooth is used for sensor configuration.
Documents
Product datasheet (PDF) →
What do you need to monitor or protect?
Tell us about your operation, the information you need, and the decisions it should support. We’ll discuss suitable technologies, integration requirements, and a practical next step.
